FAQs
More FAQs- Are there instructions to follow after my carpets are cleaned?
- What does your post construction cleaning service involve?
- Is urethane slippery when wet?
Immediately after cleaning, it’s best to allow carpets to dry for 6-8 hours before walking on them. Walking on them may flatten the fibers. Use air movers if needed to help air circulation as this will speed up the drying time. If a carpet protector such as ScotchgardTM was applied, foot traffic should be minimized for up to 24 hours to let the product cure. Don’t move any furniture back in place until carpet is completely dry or the Scotchgard carpet protector has cured.
We provide the detailed cleaning that is needed after the construction work is completed and all construction debris has been removed. This is the final step prior to turning the building over to the owner. NOTE: Construction clean-up is divided into two categories: rough clean-up and final clean. ServiceMaster Clean of Saskatoon focuses on the final clean. Rough clean-up is the removal of construction debris and is often done by the contractor. ServiceMaster Clean of Saskatoon does not do rough clean.
Any coated surface can be slippery when wet. Our urethane product is considered to have acceptable slip resistance according to the American National Standards Institute (ANSI)/National Floor Safety Institute (NFSI) B101.3-2012 test method for measuring wet dynamic coefficient of friction (DCOF) of common hard-surface floor materials. We offer optional additives to create high slip resistance (lower probability of slipping) for wet environments or areas of concern.